When you buy a Symmons Evolution® water management system , you’ll get the following components.
The gateway is the heart of the system and is actively connected to all of the Evolution devices within the system.
The temperature sensors read the water temperature inside any connected pipe and monitors humidity and ambient temperature from its surrounding environment.
The leak detector rope notifies the system if any water is detected. Like the temperature sensor, the leak detector also monitors various signals from its surrounding environment.
Download the Symmons Evolution® app and set up your free account. If you already have the app on your device, before you begin setting up your Evolution® system, make sure you have the latest version from the app store.
Symmons Evolution® iOS app for Apple devices.
Symmons Evolution® Android app for Android devices.
Setting up your Symmons Evolution® gateway in the Evolution® app is the first step in setting up your system.
Connect the power adaptor and three antennas to the back of the gateway. Refer to the below diagram for antenna and power connections.
Find a location for the Gateway. The Gateway must be able connect to an electrical outlet, and should not be placed in a public space.
After connecting the Gateway to power, the PWR light will turn green. Wait for the Status light to begin blinking before moving onto the next step.
Sign into the Symmons Evolution® app, choose Gateway at the bottom of the screen, and tap “+ Add a Gateway”. Follow the instructions within the app to complete the Gateway installation.